U.S Robotics

The router's Web User Interface (WUI) allows you to set up, modify, and view configuration variables and operational data. Follow this procedure to open the WUI:

1. If the ADSL router is not on, turn on the power. Wait for one to two minutes.
2. In a Web browser on the computer, connect to http://192.168.1.1/ to open the WUI. (If you’ve modified the router’s LAN IP address, you must use the new one.) You should see the following screen.

If the default User name and Password are not already filled in and you haven't changed any account passwords, enter admin and admin. (If you have changed the password for the admin account, enter that as the password.) Then click OK.

To begin the quick setup, click Start.

Step 1. Configuring the Internet Connection

This is the first quick setup page:

Select Protocol PPPoE

VPI: 0

VCI: 35

Click on quality of service

When you are done entering data in this page, click on Next.

Step 2. Router Login

When you open the router's Web User Interface to work with the router settings, you will need to log in with a user name of admin. In this page, enter the password you want to use with this admin account.

Enter a password and click Next.

Step 3. Wrapping Up

You are now nearly done with the quick setup process. Click Finish to save your configuration to the router.