Configure CNET Router

Before configuring CNET Router:

1. Go to: Start ->RUN, write cmd then press OK.

2. write the command ipconfig to insure that the computer is taking IP

from the router , then ping on the Router gateway (_&.&.&._):

3. Go to -> Internet Explorer -> properties -> Connection -> LAN settings

4. Go to: Proxy Server -> Advanced.

5. In Exceptions Write the Router Gateway 10.0.0.2.

6. Go to Internet Explorer write router gateway(10.0.0.2) in the Address

bar , it will ask you about the username is (admin) and Password is

(epicrouter).

7. In Router web interface, go to WAN Option.

8. Press on Submit button.

9. In PPP Write the Username and Password that provided from The ISP.

10. Make Sure that static Ip Settings are Zeros and VPI and VCI are (0,35)

11. Press Submit and save settings, in next page press save and reboot.

Prepared By: Nouman Bashir

DreamNet